Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Brake Pads on an Acura RDX?

Model: Acura Rdx MK 1 - Years 2006-2012
Part: Brake pads

To replace the front brake pads on an Acura RDX, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once the wheel is lifted, remove it by loosening the bolts that secure it to the hub. At this point, you can access the caliper at the back by loosening the screws that hold it to the brake rotor. This will allow you to detach the caliper and remove the pads inside it. After removal, install the new pads by securing the caliper and the corresponding wheel.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Acura Rdx (2013-2018 / MK 2) To replace the headlight bulb on the Acura RDX, open the hood to access the components inside the engine compartment. Specifically, disconnect the co…
Acura Rdx (2013-2018 / MK 2) To replace the battery in an Acura RDX, open the hood and locate the battery inside the engine compartment, between the air filter box and the left h…
Acura Rdx (2019-2026 / MK 3) To replace the air filter box on an Acura RDX, open the hood to detach the panel at the front of the engine compartment. Under this panel, you will f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos