Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Engine oil

Alfa Romeo Mito - Engine oil

Engine Oil Alfa Romeo Mito (2008-2018 / mk 1)

Alfa Romeo Mito (2008-2018 / MK 1)
What Does the Message "Insufficient Oil Pressure. Stop and Turn Off the Engine" Mean in the Alfa Romeo MiTo?
In this video, we will see how to respond when the message "Insufficient Oil Pressure. Stop and Turn Off the Engine" appears on the onboard computer in the …Read all…
Posted on 28 July 2026 by ScegliAuto
Alfa Romeo Mito (2008-2018 / MK 1)
Changing Oil on Alfa Romeo Mito
How do you change the engine oil on a Mito? It’s not too complicated; let’s see how to do it. Lift the car on a column lift or jack, unscrew the oil sump …Read all…
Posted on 20 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (5) Speaker (1) Antenna (1) Car stereo (8) Air vents (3) Bushings (1) Spark plugs (2) Glow plugs (1) Body (1) Control unit (1) Key (3) Trunk lock (1) Timing belt (9) Onboard computer (3) Checks and maintenance (11) Dashboard (3) Shifter boot (1) Bearing (1) Electric cooling fan (1) Headlight (5) Tail light (5) Air filter (4) Cabin air filter (3) Diesel fuel filter (1) Clutch (2) Accessory kit (2) Light bulb (9) Side marker bulb (1) Headlight bulb (13) Tail light bulb (1) Instrument panel light (2) License plate light (3) Handle (3) Power window motor (2) Transmission fluid (1) Engine oil (2) Clock (1) Door trim panel (5) Front bumper (5) Rear bumper (7) Brake pads (2) Hydraulic pistons (1) Shift knob (2) Car door (1) Power window switch (1) Instrument cluster (1) Radiator (1) Wheel (1) Fuse box (22) Seat (3) Door lock (1) Side mirror (6) Rearview mirror (1) Warning light – error code (4) Service warning light (11) Manufacturer emblem (5) Windshield wipers (3) Center console tunnel (2) Blower motor (2)

How to Remove the Rear Bumper of the Peugeot 308?

To remove the rear bumper of the Peugeot 308, open the tailgate and then loosen the screws that secure the two rear light clusters from the inside. Once these two lights have been removed, you can proceed to pull the lights from their housing and disconnect their connectors. At this point, loosen the screws that secure the bumper from its underside, from inside the wheel arches, and from inside the light housings. When all screws have been loosened, you can detach the old bumper and replace it with a new one.

Watch the video!


by ScegliAuto

More videos