Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Mass Air Flow Sensor on an Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: MAF sensor

This video demonstrates how to remove the mass air flow sensor from an Alfa Romeo 147. Use a socket wrench to unscrew the battery securing bolt, then remove the battery from the engine bay (grip it by the handle at the top). After removing the battery, unscrew the two metal plates in the engine bay and take them out. Underneath this plate, you will find the mass air flow sensor. Unscrew the securing screws with a screwdriver, then disconnect the power connector and pull the component out of its housing. -Screwdriver with bits -Socket wrench with sockets.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial, you will learn how to remove and replace the coolant thermostat on the Alfa Romeo 147 Twin Spark. First, open the bonnet and …
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
Alfa Romeo 147 (2000-2010 / MK 1) This guide shows you how to remove and replace the alternator on the Alfa Romeo 147, following the instructions below. First, open the bonnet and sta…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos