Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the coolant thermostat on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Thermostat
Operation: How to replace the coolant thermostat on Alfa Romeo 147

In this video tutorial we will see how to remove and replace the coolant thermostat on the Alfa Romeo 147 Twin Spark. First of all we open the bonnet and unscrew the cap of the expansion tank; then we lift the car and disconnect the coolant hose, letting it drain into a container. At this point we remove the motor protection and disassemble the suction sleeve, disconnecting the mass air flow sensor; then we unscrew the fixing screws of the thermostat, disconnecting the pipes of the coolant. We just have to replace it with the new one and reassemble everything!


Posted on 6 March 2024 by ScegliAuto



Replacement of the thermostat for the Alfa Romeo 147 1.6.
Alfa Romeo 147 (2000-2010 / MK 1) Today's instructions will show us how to disassemble and replace the thermostat of the Alfa Romeo 147 1.6. First, we open the car's engine hood and s
Replacement of the heat exchanger of the Alfa Romeo 147 1.9 JTDM
Alfa Romeo 147 (2000-2010 / MK 1) Let's find out the main steps to disassemble and replace the oil cooler of the Alfa Romeo 147 1.9 JTDM. First of all we open the bonnet of our car an
How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos