Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Remove the Alternator from the Alfa Romeo 147 1.6

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Alternator

This guide shows you how to remove and replace the alternator on the Alfa Romeo 147, following the instructions below. First, open the bonnet and start by disconnecting all the wiring and the fuel injection rail to access the alternator located underneath. Then, use a ratchet spanner to unscrew the alternator mounting bolts, and disconnect the electrical connector as shown in the video. At this point, remove and replace the alternator with the new one, applying the reverse procedure!

Updated on 5 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Alternator from an Alfa Romeo 147
How to Remove the Alternator from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this brief guide, you will find instructions to remove and replace the alternator on an Alfa Romeo 147. First, open the bonnet of your car and sta…
How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
Guide to replacing the clutch of the Alfa Romeo 147 1.9 JTD
Guide to replacing the clutch of the Alfa Romeo 147 1.9 JTD
Alfa Romeo 147 (2000-2010 / MK 1) In this guide we will see the main instructions that will allow us to disassemble and replace the clutch kit on the Alfa Romeo 147 1.9 JTD. First of …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos