Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the side ventilation nozzle of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Air vents

Video tutorial

Below we will see the steps on how to disassemble and replace the side air vent nozzle of the Alfa Romeo Giulietta. First, we get into the car and start removing the plastic cover of the buttons next to it; disconnect the electrical connector on the back, as shown in the video.

At this point, use a torx key or screwdriver to unscrew the screw of the air vent nozzle, in order to remove it; then install the new one, fixing it correctly, and finally reassemble the plastic cover of the buttons and make the electrical connection.


Posted on 18 February 2025 by ScegliAuto


Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) To remove the right air vent of the Alfa Romeo Giulietta, open the glove compartment and remove the rubber cap using a flat-head screwdriver. Under t…
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide shows you how to remove the air vents on an Alfa Romeo Giulietta located at the sides of the central dashboard. Start by using a plastic l…
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos