Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Vent of an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Air vents

This guide shows you how to remove the air vents on an Alfa Romeo Giulietta located at the sides of the central dashboard. Start by using a plastic lever to remove the trim covers near the air vent (located on the centre console). Once the cover is removed, unscrew the securing screws of the vent and pull it out by hand. Pull the vent until it comes out of its housing. Repeat this procedure for the other air vents on the car's dashboard. Finally, install the new air vents.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the side ventilation nozzle of the Alfa Romeo Giulietta
How to replace the side ventilation nozzle of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Below we will see the steps on how to disassemble and replace the side air vent nozzle of the Alfa Romeo Giulietta. First, we get into the car and st…
How to Remove the Right Air Vent of the Alfa Romeo Giulietta?
How to Remove the Right Air Vent of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To remove the right air vent of the Alfa Romeo Giulietta, open the glove compartment and remove the rubber cap using a flat-head screwdriver. Under t…
How to Remove the Centre Console of the Alfa Romeo Giulietta
How to Remove the Centre Console of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this tutorial, you will learn how to remove the centre console of the Alfa Romeo Giulietta, following the instructions below. First, get inside th…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos