Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear tail light bulbs of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Tail light bulb

In this guide we will see the instructions that will allow us to disassemble and replace all the bulbs of the rear headlight of the Alfa Romeo Giulietta. First, we open the rear hatch of the trunk and start unscrewing the fixing screws next to the rear headlight; then disconnect the electrical connector of the bulbs to remove it, as shown in the video. At this point, we separate the bulb holder from the light fixture, replacing any faulty bulbs with new ones (having the same fitting); we reassemble the rear light, fixing the screws correctly!

Posted on 6 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Alfa Romeo Giulietta
How to replace the rear headlight bulb of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today we will explain how to replace the bulb of the left rear headlight of the Alfa Romeo Giulietta. To replace the bulb, we need to unscrew the scr…
How to Remove the Front Headlamp on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Learn how to proceed with the removal of the front headlamp bulbs on an Alfa Romeo Giulietta. Open the bonnet by pulling the bonnet release lever and…
How to Change the Bulbs on an Alfa Romeo Giulietta
How to Change the Bulbs on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Are you having problems with the headlights on your Alfa Romeo Giulietta? In this video, learn how to replace the lighting bulbs. Open the engine com…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos