Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the panels of an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Door trim panel

As shown in the video, the most difficult panel to remove is the rear one, and that is what we will see. Remove the trim (start from the bottom using a plastic tool and lever upwards until it detaches), then unlock the window switch button which has two tabs to press: squeeze them towards the switch panel, pull up, and the button will come out. Underneath, you will find the first screw, and two more under the trim that we removed. Now, use pliers to pry along the entire perimeter to detach the clips, after which you can pull off the panel. The front panel has additional screws: there is a star screw under the door at the base of the panel and one in the handle recess.

Posted on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) This excellent video is brief but very informative, explaining with figures all the steps to replace the number plate lights on the Alfa Romeo Giulie…
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…

Other guides you may be interested in

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos