Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to replace the rear pads on an Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Brake pads
Operation: How to replace the rear pads on an Alfa Romeo Mito

Replacing worn rear brake pads on a Mito? Let's see how the brake pads are removed. We lift the car on a column bridge up to the desired height, immediately after we go to remove the wheel (with a telescopic key) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. We detach the pads from the caliper mounted on the brake disc. We mount the new pads on the brake caliper. We mount the brake caliper above the brake disc. We tighten all the pins and mount the wheel. We replace the worn pads of all brakes. We purge the pliers if necessary.


Posted on 9 December 2023 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
Replacing the brake pads on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) We replace the disc brake pads if they are damaged, let's see how they replace them on the Alfa Romeo Mito. We raise the car on a column point up to
What kind of lamps does the Alfa Romeo Mito mount and how they are mounted
Alfa Romeo Mito (2008-2018 / MK 1) Today we will tell you what kind of bulbs the Alfa Romeo Mito is fitted with and how to replace them. Let's start by saying that the Alfa Romeo Mito

Other guides that may interest you

    Frequently Asked Questions

    • Mito 2008-2018 - What to do when the brake pad warning light comes on on the Alfa Romeo Mito? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos