Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on an Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Brake pads

Replace the brake pads if they are damaged; here’s how to do it on an Alfa Romeo Mito. Lift the car on a column jack to the desired height, then remove the wheel with the respective nuts. Unscrew the caliper retaining bolt, remove the caliper from the wheel hub, and detach the pads from the hub caliper using a screwdriver. Fit new pads onto the brake caliper, then reattach the caliper with the support onto the brake disc, tighten all the nuts, and refit the wheel to finish.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Replace the Dipped Headlights in the Alfa Romeo MiTo
How to Replace the Dipped Headlights in the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, we will see how to replace the front bulbs of the Alfa Romeo MiTo. Specifically, we will install new, more efficient LED units. Fir…
How to Remove the Cabin Fan from an Alfa Romeo MiTo
How to Remove the Cabin Fan from an Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) Before you can start, sit in the front passenger seat of your Alfa Romeo MiTo. Begin by unclipping and removing the lower right cover of the centre c…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos