Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Gear Shift Gaiter on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Shifter boot

Video tutorial

In this video tutorial, you will learn how to remove the gear shift gaiter from an Alfa Romeo Giulietta. First, get inside the car and use a lever to detach the grey top cover of the gear lever, which is attached with adhesive.

Then, pull off the gaiter by detaching it from the supports, and if desired, remove the gear knob as well. The video shows how to fit the new gaiter: once the old one is removed, ensure the new gaiter is properly inserted into all corners so that it does not come loose once fitted, as demonstrated in the video.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to replace the gear knob and boot of the Alfa Romeo Giulietta
How to replace the gear knob and boot of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In a few simple steps, we will see how to disassemble and replace the gear shift knob and boot of the Alfa Romeo Giulietta. First, get into the car a…
Dismantling Centre Console on Alfa Romeo Giulietta
Dismantling Centre Console on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video tutorial, you will learn how to dismantle the centre console of an Alfa Romeo Giulietta. Get inside the vehicle and first remove the…
How to Replace the Gear Knob on an Alfa Romeo Giulietta?
How to Replace the Gear Knob on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the gear knob on an Alfa Romeo Giulietta, lever out the groove that separates the lower part of the knob from the upper dome: the dome mus…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos