Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Centre Console on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Dashboard

Video tutorial

In today's video tutorial, you will learn how to dismantle the centre console of an Alfa Romeo Giulietta. Get inside the vehicle and first remove the gear lever gaiter by unclipping it from the sides, along with the part where the drive mode selector is located: to do this, simply lever on the sides and the plastic parts.

At this point, also remove the gear lever gaiter and unclip the other plastics of the centre tunnel, also removing the air vents. Once the centre tunnel is removed, disconnect any electrical connectors found underneath, as shown in the video.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

Dismantling the Tunnel and Centre Console of the Alfa Romeo Giulietta
Dismantling the Tunnel and Centre Console of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide provides instructions for dismantling the centre console and tunnel of the Alfa Romeo Giulietta. First, get inside the vehicle and remove …
Removing the Dashboard Cover and Radio on Alfa Romeo Giulietta
Removing the Dashboard Cover and Radio on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this guide, we will see the instructions that will allow us to remove the central plastic cover of the dashboard and the standard radio of the Alf…
How to Adjust the Handbrake on an Alfa Romeo Giulietta
How to Adjust the Handbrake on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, you will learn the steps to adjust the handbrake on an Alfa Romeo Giulietta by yourself. To perform this operation, remove the rear cover of t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos