Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Tunnel and Centre Console of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Center console tunnel

Video tutorial

This guide provides instructions for dismantling the centre console and tunnel of the Alfa Romeo Giulietta. First, get inside the vehicle and remove the plastic cover at the base of the gear lever; to do this, remove the two side covers, then remove the central cover by prying it off from the sides, as shown in the video.

Next, disconnect the electrical connectors found underneath, then remove the gaiter of the handbrake; proceed to remove the plastic partition of the central tunnel, following the video tutorial until the end!


Updated on 18 July 2026 by ScegliAuto


Related tutorials

Dismantling Centre Console on Alfa Romeo Giulietta
Dismantling Centre Console on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video tutorial, you will learn how to dismantle the centre console of an Alfa Romeo Giulietta. Get inside the vehicle and first remove the…
How to Reset the Tyre Pressure Light in an Alfa Romeo Giulietta
How to Reset the Tyre Pressure Light in an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Below are the instructions that will allow you to reset the tyre pressure light in an Alfa Romeo Giulietta; before recalibrating the TPMS sensors, it…
How to Set the Time on an Alfa Romeo Giulietta
How to Set the Time on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before you can start, sit in the driver's seat of your Alfa Romeo Giulietta. First, activate the instrument cluster, then press the "Set" button. Nex…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos