Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Giulia
    4. : Removing the Alfa Romeo Giulia door panel

Alfa Romeo Alfa Romeo Giulia - Video tutorial

Model: Alfa Romeo Alfa Romeo Giulia MK 1 - Years 2016-2024
Part: Door panel
Operation: Removing the Alfa Romeo Giulia door panel

In today's video tutorial we will see how to remove the rear door panel of an Alfa Romeo Giulia. First of all we open the door and start by removing all the small plastic covers with a very thin plastic lever, which hide the screws: then with a screwdriver we go to unscrew all the screws present in the panel. At this point we are going to pry the sides of the panel, in several points, in order to slowly unhook it and pull it towards you: once unhooked we go to disconnect the cable of the handle that we find on the back and the electrical connector of the window lifter.


Posted on 23 December 2023 by ScegliAuto

This video is currently unavailable


How to remove the door panel on Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) We perform the disassembly of the door panel (front left) on Alfa Romeo Giulia: disconnect the battery terminals in the engine compartment, with a sc
How to reset the "Service" light on an Alfa Romeo Giulia?
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) To reset the "Service" light on an Alfa Romeo Giulia, follow these steps. Start by pressing the brake pedal five times in a row. Then, turn on the in
How to remove the rear lights in the Alfa Romeo Giulia?
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) In this tutorial, we can see how to disassemble the rear lights in the Alfa Romeo Giulia, a very simple and quick operation. First of all, make sure

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos