Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Removing the headlight bulb Alfa Romeo 159

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Headlight bulb
Operation: Removing the headlight bulb Alfa Romeo 159

In this video we will see how to remove the headlight bulbs of an Alfa Romeo 159, in particular the parking light; It is however possible to access all the other bulbs using the same procedure. First we open and raise the bonnet and remove the rubber protection cap of the bulbs: then we go to disconnect the electrical connector of the bulb and its iron clip to be able to extract and replace it. If we have to replace the position light, instead, it will be sufficient to remove the bulb holder together with the bulbs: extract the old lamp and replace it with the new one.


Posted on 26 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 159 2005-2011 - How to change the position lights of the Alfa Romeo 159? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos