Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Replacing the headlight bulbs on Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Headlight bulb
Operation: Replacing the headlight bulbs on Alfa Romeo Giulietta

Lift the hood and locate the bolts that secure the affected headlight at the top: one is a 10mm bolt, the other a torx t55. Another bolt secures from under the headlight, then inside the bumper, and is accessed via the wheel arch. This is fixed by four screws, as shown in the video, after which you can access the internal torx t30 bolt. Unscrew another torx t55 above the bumper to be able to move it more easily and then extract the light. At this point it will be child's play to disconnect the connector and replace the bulb concerned by accessing from the back of the headlight.


Posted on 16 February 2024 by ScegliAuto



How to replace the high beam bulbs in the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) Replacing the low beam headlight bulbs in the Alfa Romeo Giulietta is a very simple and fast operation, let's see how to proceed in this tutorial. To
Replacing the headlight bulbs on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial we will see how to remove and replace the headlight bulb on the Alfa Romeo Giulietta, following these simple steps. First of a
How to remove the headlight on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Let's see how to remove the headlight bulbs on Alfa Romeo Giulietta cars. We open the bonnet by pulling the bonnet opening lever and put it in safety

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos