Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Replacing the headlight bulbs on the Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Headlight bulb
Operation: Replacing the headlight bulbs on the Alfa Romeo Giulietta

In this video tutorial we will see how to remove and replace the headlight bulb on the Alfa Romeo Giulietta, following these simple steps. First of all we open the bonnet of our car and start by removing the plastic protection cap, which we find on the back of the headlight; then let's disconnect the electrical connector of the light bulb, releasing the metal clip to extract it, as shown in the video. At this point we can replace it with the new one, of the right type (in this case of type H7); then we carry out the same procedure for replacing the bulb of the other headlight!


Posted on 14 March 2024 by ScegliAuto



How to replace the high beam bulbs in the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) Replacing the low beam headlight bulbs in the Alfa Romeo Giulietta is a very simple and fast operation, let's see how to proceed in this tutorial. To
How to remove the headlight on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Let's see how to remove the headlight bulbs on Alfa Romeo Giulietta cars. We open the bonnet by pulling the bonnet opening lever and put it in safety
How to change the bulbs of an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Do we have problems with the headlights of our Alfa Romeo Giulietta? Let's see in this video how to proceed with the replacement of the lighting bulb

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos