Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Headlamp Bulb Replacement for Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

Video tutorial

Below are the instructions to remove and replace the front headlamp bulbs of the Alfa Romeo Giulietta. First, open the vehicle's bonnet and start unscrewing the four screws located at the top of the front bumper; then unscrew the screws located in the wheel arch, finishing with the screws of the headlamp assembly.

At this point, disconnect the electrical connector for the lights to remove the headlamp, then remove the protective plastic cap to replace the bulb (with the correct type and fitting); finally, reassemble the front headlamp and secure the bumper!


Posted on 7 February 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on an Alfa Romeo Giulietta
Replacing the Headlight Bulb on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, you will learn how to remove and replace the headlight bulb on an Alfa Romeo Giulietta by following these simple steps. First…
How to Remove the Front Headlamp on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Learn how to proceed with the removal of the front headlamp bulbs on an Alfa Romeo Giulietta. Open the bonnet by pulling the bonnet release lever and…
Replacing the front headlight bulb on the Alfa Romeo Giulietta
Replacing the front headlight bulb on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, you will learn how to remove and replace the front headlight bulb, as well as how to disassemble the front headlight, on the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos