Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to remove the front bumper on the Alfa Romeo Giulietta?

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Front bumper
Operation: How to remove the front bumper on the Alfa Romeo Giulietta?

In this tutorial, we can see how to remove the front bumper on the Alfa Romeo Giulietta, a very simple and quick operation. First, we open the hood, then we locate the bolts on the upper edge of the bumper and unscrew them with a Torx T55 key. We continue by removing the lower panel with a T30 key, remove the fastening screws of the wheel arches to the bumper, and starting from one of the two ends, we separate it from the frame by pulling it outward. Finally, we disconnect the fog light connectors and install the replacement, if necessary, following the reverse procedure.


Posted on 17 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Giulietta 2010-2020 - How much does it cost to paint a bumper on a Giulietta? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos