Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on an Alfa Romeo 166

Model: Alfa Romeo 166 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake pads

Video tutorial

Before starting, lift the rear end of your Alfa Romeo 166. Begin by removing the rear wheel by unscrewing the fixing bolts. Next, unscrew and remove the bolts securing the brake caliper to the disc, then slightly move it away.

Once done, retract the pistons using a flathead screwdriver, then fully move the brake caliper aside. At this point, disengage and remove the rear brake pads, completing the disassembly.

To fit the new pads, follow these instructions in reverse, and the replacement will be finished.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of an Alfa Romeo 166
How to Remove the Door Panel of an Alfa Romeo 166
Alfa Romeo 166 (1998-2007 / MK 1) Before you begin, open the door of your Alfa Romeo 166. Start by prising out and removing the inserts of the door panel using a thin but sturdy tool.…
How to Replace the Engine Oil on an Alfa Romeo 166
How to Replace the Engine Oil on an Alfa Romeo 166
Alfa Romeo 166 (1998-2007 / MK 1) Start by opening the front bonnet of your Alfa Romeo 166. Next, unscrew and remove the top oil filler cap. Once done, lift the front of your vehicle,…
How to Replace the Timing Belt on an Alfa Romeo 166?
How to Replace the Timing Belt on an Alfa Romeo 166?
Alfa Romeo 166 (1998-2007 / MK 1) To replace the timing belt on the Alfa Romeo 166, access the engine bay and loosen the tensioner using a pneumatic gun or a socket wrench: the belt a…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos