Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Removal of the external door handle on the Alfa Romeo Giulietta

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Handle
Operation: Removal of the external door handle on the Alfa Romeo Giulietta

In this short and simple video, let's see the instructions needed to remove and replace the external front door handle on the Alfa Romeo Giulietta. First we open the front door and start by unscrewing the fixing screw that we find on the side of the door, using a T20 torx screwdriver; in this way we will unlock the handle, then remove the small rectangular lid and then the handle, as shown in the video. So we just have to replace it with the new one, of the right type, applying the reverse procedure for reassembly!


Posted on 22 February 2024 by ScegliAuto



How do you replace the external handle of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to replace the external handle of the Alfa Romeo Giulietta, you need to open the door so that you can detach the protective cover located on
How to remove the door panel of an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, we will have to open the door of our Alfa Romeo Giulietta. Let's start by disengaging and removing the cover positioned near the ext
How to replace the internal handle of the Alfa Romeo Giulietta.
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, we will see how to dismantle the door panel of the Alfa Romeo Giulietta. This operation may be useful if you need to replace the el

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos