Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Replacing the boot button on the Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Locking the trunk
Operation: Replacing the boot button on the Alfa Romeo Mito

In this video tutorial we will see how to remove and replace the boot opening and closing button on the Alfa Romeo Mito, in simple steps. First we open the tailgate and start by removing the panel or the internal lining, removing the plastic clips; after which we disconnect the electrical connector of the electric lock and unscrew the fastening screws of the closure button, as well as of the whole emblem, as shown in the video. So we just have to replace it with the new one, applying the reverse procedure for reassembly!


Posted on 5 March 2024 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
How to replace the rear bulbs on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's video tutorial we will see the main instructions to disassemble and replace the rear light bulbs on the Alfa Romeo Mito, in simple steps.
How to remove the rear stop light of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before we can start, we will have to go to open the tailgate of the trunk of our Alfa Romeo Mito. So let's start by unscrewing and removing the screw

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos