Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Steering Wheel from an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Steering wheel

In this video, you will see how to remove the steering wheel from an Alfa Romeo Giulietta, as well as from other models by the manufacturer. First, get inside the car and use a flat screwdriver to pry out the steering wheel airbag, as shown in the video. Next, disconnect the two electrical connectors for the airbags to remove it completely; then, simply undo the central bolt of the steering wheel using a 24 mm socket with an extension. For reassembly, just apply the reverse procedure!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Alfa Romeo Giulietta located?
Where is the OBD port of the Alfa Romeo Giulietta located?
Alfa Romeo Giulietta (2010-2020 / MK 1) If you want to locate the OBD port on your Alfa Romeo Giulietta in order to use a diagnostic tool, then all you have to do is carefully read the foll…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…
How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos