|
Do it yourself
| |||
| ||||
Replacing the Radiator Fluid on the Alfa Romeo Giulietta
Model: Alfa Romeo Giulietta
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Video tutorial
From underneath the car, remove the undertray plastic using the screws on the bulkhead to access the radiator drain tap. Before opening the tap and removing the fluid, start the car for a few minutes: with the engine running, the thermostat will operate, allowing you to drain the coolant completely. Turn off the engine and place an empty container under the radiator, open the tap, and let all the fluid drain out. You can then pour the coolant, properly mixed with deionised water, into the container using a funnel. Start the car for a few minutes and then close the container with the cap.
Updated on 17 May 2026 by ScegliAuto
Related tutorials
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
This guide will show you the main instructions to remove and replace the EGR valve radiator or heat exchanger on the Alfa Romeo Giulietta 2.0 JTDm. F…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
Before you can start, sit in the driver's seat of your Alfa Romeo Giulietta. First, activate the instrument cluster, then press the "Set" button. Nex…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
If you want to locate the OBD port on your Alfa Romeo Giulietta to use a diagnostic tool, just carefully read this guide and follow the few simple st…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Cabin Fan in the Nissan Qashqai?
The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |