Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : Replacement of the EGR valve radiator on the Alfa Romeo Giulietta 2.0 JTDm.

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Radiator
Operation: Replacement of the EGR valve radiator on the Alfa Romeo Giulietta 2.0 JTDm.

Today's guide will show us the main instructions that will allow us to disassemble and replace the radiator or heat exchanger of the EGR valve of the Alfa Romeo Giulietta 2.0 JTDm. First, we open the engine hood and begin to drain the coolant; then we proceed with the disassembly of the EGR valve and its radiator, which we find at the bottom right (unscrewing all the fixing screws and disconnecting the various pipes). At this point, it will be possible to remove the EGR valve radiator, replacing it with the new original one!


Posted on 27 June 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos