Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cooling Radiator on Alfa Romeo 156

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Radiator

Today's main instructions will show you how to remove and replace the engine cooling radiator on an Alfa Romeo 156. First, open the bonnet and start by removing the front bumper, unscrewing all the fixing screws located at the top and on both sides of the front wheel arches. Next, disconnect the coolant hose, allowing the fluid to drain into a container. At this point, unscrew the radiator screws and replace it with the new one, reconnecting it and finally topping up with the new antifreeze.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant Reservoir of an Alfa Romeo 156
How to Replace the Coolant Reservoir of an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure must be carried out with the engine off. Start by opening the front bonnet of your Alfa Romeo 156. Next, position a container undernea…
How to Replace the Radiator on an Alfa Romeo 156
How to Replace the Radiator on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This video demonstrates how to remove the cooling radiator from an Alfa Romeo 156. Open the bonnet, and using a suitable socket wrench, remove the pl…
Guide to Replacing the Heating Radiator on Alfa Romeo 156
Guide to Replacing the Heating Radiator on Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) In this guide, you will find the main instructions for removing and replacing the internal heating radiator in the cabin of the Alfa Romeo 156. First…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos