Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : Removal of the central ceiling light on Alfa Romeo 159

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Interior lights ceiling light bulb
Operation: Removal of the central ceiling light on Alfa Romeo 159

Are you thinking of replacing the old bulbs in the central ceiling light of your Alfa Romeo 159 with new led bulbs to have a modern effect? Or just one of them burned out? Removing the central ceiling light is an operation that you can do by yourself following this short tutorial. First of all, to avoid contact with electricity or short circuits, carefully disconnect both poles of the battery. Then position yourself inside the passenger compartment and gently push the ceiling light down. Once detached slightly from the fabric, you will see side aluminum clips (3 on each side) that you will need to detach using a thin-blade screwdriver. Once disconnected, the ceiling light can be removed easily and before working on it, make sure you have disconnected the electrical connections and, if necessary, the connector of the Blue & me Bluetooth device.


Posted on 30 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos