Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulb on an Alfa Romeo 147?

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Light bulb

To replace the front indicator bulb on an Alfa Romeo 147, access the lower part of the engine bay: from here, you can locate the connector attached to the headlamp at the bottom of the front bumper. Disconnect the connector by pulling the bulb out of its socket so that it can be replaced with a new one. The new bulb should be connected to the connector and inserted back into its housing; after installation, check that the new bulb functions correctly.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Bulbs on an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial, you will learn how to replace the bulbs on an Alfa Romeo 147. First, open the bonnet: you do not need to remove anything to a…
How to Replace the Front Headlamp Bulb on an Alfa Romeo 147
How to Replace the Front Headlamp Bulb on an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In today's tutorial, you will learn how to remove and replace the front headlamp bulb on an Alfa Romeo 147 in simple and quick steps. First, open the…
How to change the reverse light bulb on the Alfa Romeo 147
How to change the reverse light bulb on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Let's see how to change the reverse light bulb on the Alfa Romeo 147: you will need a 10 mm spanner. There are two bolts, one towards the outer side …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos