Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 147
  6. : How to remove the front bumper of the Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Front bumper
Operation: How to remove the front bumper of the Alfa Romeo 147

In this video tutorial we will see the main steps to remove and replace the front bumper of the Alfa Romeo 147, following the instructions below. First of all we open the bonnet and start by unscrewing all the screws that we find on the upper part of the front bumper; then we go to unscrew the screws that we find on both sides of the wheel arches, using a Phillips screwdriver, as shown in the video. At this point we unscrew the additional screws that we find under the bumper, subsequently releasing the latter from the sides; we just have to disconnect the electrical connector to remove the bumper!


Posted on 4 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos