Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the headlight bulb on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Headlight bulb
Operation: How to replace the headlight bulb on Alfa Romeo 147

In today's video tutorial we will see how to remove and replace the headlight bulb on the Alfa Romeo 147, in simple and quick steps. First of all we open the bonnet of our car and we go to remove the plastic cap that we find behind the headlight; after which we disconnect the electrical connector of the light bulb and then we go to unhook the metal clip to remove it, as shown in the video. At this point we can replace the lamp with the new one, of the right type (in this case of type H1); insert it in the correct direction and reassemble everything!


Posted on 29 February 2024 by ScegliAuto



How do you replace the headlight bulb on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) In order to replace the headlight bulb of the Alfa Romeo 147 you have to go and open the hood so that you can loosen the screws that fix the headligh
How to change the reverse light bulb on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Let's see how to change the reverse light bulb of the Alfa Romeo 147: you will need a 10mm wrench. There are two bolts, one towards the outer side of
How to change the headlight bulbs of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In today's video tutorial we will see how to remove and replace the headlight bulbs of the Alfa Romeo 147, but also on the 149 and 156, following the

    Frequently Asked Questions

    • 147 2000-2010 - What type of position light bulb is fitted to the Alfa Romeo 147? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos