Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to change the headlight bulbs of the Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Headlight bulb
Operation: How to change the headlight bulbs of the Alfa Romeo 147

In today's video tutorial we will see how to remove and replace the headlight bulbs of the Alfa Romeo 147, but also on the 149 and 156, following the instructions below. First of all, we open the bonnet and begin to disassemble our headlight, unscrewing the fixing screws and disconnecting the electrical connector of the light bulb; then we go to release the metal clip to remove and replace the bulb with the new one, of the right type (in this case a new led light with H7 connection is installed). So we just have to reassemble everything!


Posted on 15 May 2024 by ScegliAuto



Removing the Alfa Romeo 147 headlight
Alfa Romeo 147 (2000-2010 / MK 1) Today, in this video tutorial, we will see how to remove the headlights of the Alfa Romeo 147. We will see later in the video the disassembly of the
How to replace the front headlight bulbs of the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) The main instructions for today will show us how to disassemble and replace the low-beam bulbs of the front headlight of the Alfa Romeo 147. First, w
How do you replace the headlight bulb on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) In order to replace the headlight bulb of the Alfa Romeo 147 you have to go and open the hood so that you can loosen the screws that fix the headligh

    Frequently Asked Questions

    • 147 2000-2010 - What type of position light bulb is fitted to the Alfa Romeo 147? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos