Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Warning light – error code

To reset the service light on an Alfa Romeo 159, first turn on the ignition without starting the engine. Then, press the accelerator pedal and hold it down while pressing the brake pedal seven times. After pressing the brake pedal seven times, keep it fully pressed for one minute while continuing to hold the accelerator pedal. After one minute, turn off the ignition while keeping the accelerator pedal pressed and releasing the brake pedal. Once the ignition is off, hold the accelerator pedal down for one minute. After doing this, the reset is complete, and you can start the car to check that everything has been done correctly.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Alfa Romeo 159 located?
Where is the OBD port of the Alfa Romeo 159 located?
Alfa Romeo 159 (2005-2011 / MK 1) In the following guide aimed at all of you who own an Alfa Romeo 159, we will explain how you can access the OBD port. First of all, open the driver'…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
How to Reset the Engine Oil Light on the Alfa Romeo 159 - Brera
Alfa Romeo 159 (2005-2011 / MK 1) Today, you will discover the steps to reset the service light for routine maintenance of the oil change on the Alfa Romeo 159, as well as on the Brer…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos