Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Stelvio
    4. : How to replace the engine oil on the Alfa Romeo Stelvio.

Alfa Romeo Alfa Romeo Stelvio - Video tutorial

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years 2016-2024
Part: Engine oil
Operation: How to replace the engine oil on the Alfa Romeo Stelvio.

If we want to proceed with the replacement of the engine oil and filter on this car model, in the description below we have collected all the useful indications and all the steps to be taken for the replacement. First, it is necessary to lift the car and remove the sound-absorbing panel placed under the engine. Then proceed to unscrew the oil drain plug after placing a tank for collecting the used oil. Then unscrew the oil filter and replace it with the new one after replacing the gasket and then close the oil drain plug and proceed to the top of the engine compartment to fill the circuit with the new lubricant.


Posted on 10 June 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Alfa Romeo Stelvio 2016-2024 - How to intervene if the engine oil warning light comes on in the Alfa Romeo Stelvio? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - How much engine oil is needed for replacement on the Alfa Romeo Stelvio 2.2? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - How much engine oil does the Alfa Romeo Stelvio 2.2 diesel need? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - How do you reset the Alfa Romeo Stelvio oil warning light? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos