Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a USB Charging Socket in an Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Fuse box

In today's video, you will see how to install a USB charging socket in place of the 12 V socket in an Alfa Romeo MiTo. First, remove the plastic from the centre tunnel. Unclip it carefully. Once removed, you can disconnect the old socket from the connector. Insert the new one and, if necessary, proceed to connect any new connectors. Test to see if everything works correctly, and if the answer is affirmative, you can reconnect everything. Then, reinsert the plastic into its place and finish your work. As you have seen, this is a quick job.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Cigarette Lighter Socket on the Alfa Romeo Mito
How to Remove and Replace the Cigarette Lighter Socket on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video, you will see how to remove and replace the cigarette lighter socket with a dual USB port on the Alfa Romeo Mito, following the instruc…
How to install the front camera or dashcam on the Alfa Romeo Mito
How to install the front camera or dashcam on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this guide, we will cover the main instructions on how to install the front camera or dashcam on the Alfa Romeo Mito. First, get into the vehicle …
How to Install the LED Indicator Kit on an Alfa Romeo Mito
How to Install the LED Indicator Kit on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, you can see how to install the LED indicator kit on an Alfa Romeo Mito. For the installation, you will need a specific key fo…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos