Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Alfa Romeo MiTo?

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

Video tutorial

To reset the Service light on the Alfa Romeo MiTo, connect the diagnostic tool to the vehicle's OBD port, located at the bottom left of the steering column. To access the port, remove the plastic protective panel in this area: once the connector is plugged in, navigate through the menu on the scanner's display.

Select the relevant car model and follow the instructions to reset the light. Once the reset is complete, disconnect the scanner and replace the panel.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on an Alfa Romeo MiTo?
How do you reset the Service light on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) It will be possible to reset the Service light that appears on the instrument panel of the Alfa Romeo MiTo by inserting the ignition key into the ign…
How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6
How to Reset the Oil Warning Light on the Alfa Romeo Mito 1.6
Alfa Romeo Mito (2008-2018 / MK 1) After completing a full service with oil and filter replacement, it is important to reset the oil warning light; otherwise, the car will continue to …
How to Reset the Oil Light on an Alfa Romeo MiTo?
How to Reset the Oil Light on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To reset the oil light on your Alfa Romeo MiTo, you cannot follow a manual procedure, as it is necessary to connect a diagnostic tool to the vehicle'…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos