Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Cigarette Lighter Socket on the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cigarette lighter

Video tutorial

In this video, you will see how to remove and replace the cigarette lighter socket with a dual USB port on the Alfa Romeo Mito, following the instructions below. First, remove the centre armrest by unscrewing the screws at the base (under the plastic cover); then remove the gear knob and the centre tunnel to access the cigarette lighter socket.

Next, disconnect the electrical connector and replace the cigarette lighter with the USB port, as illustrated in the video; finally, reassemble everything by following the video to the end!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
Remove and Replace the Air Filter of the Alfa Romeo Mito
Remove and Replace the Air Filter of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, in this video tutorial, you will see how to remove and replace the air filter and its housing of the Alfa Romeo Mito, following the instructio…
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
How to Replace the Front Headlamp Bulb on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today, we will look at the instructions needed to remove and replace the front headlamp bulb on an Alfa Romeo Mito. First, get inside the vehicle and…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos