Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to remove the door panel of the Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Door panel
Operation: How to remove the door panel of the Alfa Romeo 147

The disassembly of the door panel is very simple to carry out and you start by removing the cap and the underlying screw inside the seat of the opening lever and then removing the frame that covers it complete with twitter; then remove the cap applied on top of the handle of the handle in the center of the panel to access the screw below and then the one that fixes the push button panel of the window lifters to extract it from its seat; at this point unscrew the screws at the base of the handle, the one under the clearance light and those under the lower edge of the panel; finally unhook the pressure clips along the edge of the panel.


Posted on 6 September 2023 by ScegliAuto

This video is currently unavailable


Removal of the Alfa Romeo 147 front door panel
Alfa Romeo 147 (2000-2010 / MK 1) In today's video we will see how to remove and replace the front door panel of the Alfa Romeo 147, but also of the GT. First we open the front door a
Removing the Alfa Romeo 147 door panel
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial we will see how to remove the door panel of an Alfa Romeo 147. First we open the door and secondly we go to remove all the cap
Removing the door panel on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Let's see in this video how to remove the rear door panel on the Alfa Romeo 147, following these simple and quick steps. First of all we open the doo

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos