Do it yourself
| ||||
|
Alfa Romeo Giulietta - Video tutorial
Model: Alfa Romeo Giulietta
MK 1
- Years 2010-2020 Removing the front door panel is quite simple to carry out and requires no special precautions other than not to damage the edges of the interlocking elements; then start by unhooking the triangular-shaped plastic cover applied in correspondence with the seat of the external rear-view mirror and then remove the molding that covers the handle near the glass-raising control panel; it will also be necessary to remove the grille that covers the loudspeaker and the protective caps of the screws on the external edge of the panel and inside the seat of the opening lever; at this point it is sufficient to unscrew the screws, release the pressure locks along the edges, remove the panel and disconnect the sockets and the lock cable to complete the disassembly.
Posted on 19 September 2023 by ScegliAuto
Alfa Romeo Giulietta door panel removal guide
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short and simple guide we will see the steps that will allow us to disassemble and replace the front door panel of the Alfa Romeo Giulietta.
How to remove the door panel on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short and simple guide we will understand what are the steps to remove the front door panel on the Alfa Romeo Giulietta first series. First w
How to remove the front right door panel on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Remove the right front door panel on Alfa Romeo Giulietta: disconnect the battery terminals in the engine compartment, unscrew the screws located in Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |