Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Rs 125
Part: Engine

To disassemble the engine of the Aprilia RS 125, you need to loosen the screws that secure it to its seat: you will also need to remove the manifolds and connectors of the respective sensors. At this point, you can unscrew the screws that secure the cylinder to the top of the engine block: the piston inside can be removed from the connecting rod by expanding the ring and removing the pin. At this point, you can access the crankshaft and possibly all other components to replace them: this way you can close the engine and verify that it works.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Aprilia RS 125?
How do you disassemble the engine of the Aprilia RS 125?
Rs 125 The engine of the Aprilia RS 125 can be disassembled by loosening the screws of the supports that fix the engine block to its housing in the center o…
How do you disassemble the engine of the Aprilia RS 125?
How do you disassemble the engine of the Aprilia RS 125?
Rs 125 In order to disassemble the engine of the Aprilia RS 125, you need to loosen the screws that fix the engine block to its housing, so that it is possi…
How do you dismantle the engine of the Aprilia RS 125?
How do you dismantle the engine of the Aprilia RS 125?
Rs 125 The engine of the Aprilia RS 125 can be disassembled by extracting it from its housing, unscrewing the screws that hold it in place and disconnecting…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos