Do it yourself
Frequently asked questions about cars and motorcycles

Model: Aprilia Rs 660
Part: Windshield

In this guide we will see the steps that will allow us to disassemble and replace the windshield fairing on the Aprilia RS 660. First of all, we put the motorcycle on the stand and start unscrewing the screws found on the side of the fairing, in order to detach it and remove it gently; we then proceed with the installation of the new windshield fairing, fixing it correctly with the original screws or those provided in the kit, as shown in the video. We then verify that the new fairing is securely attached to the front fairing, tightening all the screws in a cross pattern.

Posted on 31 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Rs 660 Today we will discover the instructions that will allow us to change the driving modes or engine mappings on the Aprilia RS 660, as well as on the Tu…
Rs 660 To replace the air filter of the Aprilia RS 660, you need to loosen the screws that secure the fuel tank to its housing: the screws will be found und…
Rs 660 Below are the steps to remove and replace the battery on an Aprilia RS 660 motorcycle, following the instructions provided. First, place the motorcyc…

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos