Do it yourself
Frequently asked questions about cars and motorcycles

Model: Aprilia Rs 660
Part: Battery

Below are the steps to remove and replace the battery on an Aprilia RS 660 motorcycle, following the instructions provided. First, place the motorcycle on its stand and begin by removing the rider's seat; you will find the battery underneath, as shown in the video. At this point, disconnect both battery terminals (positive and negative), remove the old battery, and replace it with the new one; install the correct type of battery with the same amperage, reconnect it, and refit the seat!

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Rs 660 To replace the battery of the Aprilia RS 660, loosen the screws that secure the seat to its housing so that it can be removed. After the seat is deta…
Rs 660 Today we will discover the instructions that will allow us to change the driving modes or engine mappings on the Aprilia RS 660, as well as on the Tu…
Rs 660 Today we will discover the instructions that will allow us to disassemble and replace the rear wheel of the Aprilia RS 660 motorcycle. First, we put …

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos