Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Aprilia Sr 50
Part: Engine

To disassemble the engine of the Aprilia SR 50R, you need to loosen the screws that hold it to its housing, disconnect the manifolds, and also remove all the connectors of the appropriate sensors. At this point, it will be possible to loosen the screws that hold the cylinder so that it is possible to access the piston inside it: the latter can be removed from the connecting rod in order to identify the crankshaft and all the remaining components. By replacing the necessary ones, the engine can be closed, verifying that everything works correctly.

Posted on 19 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gearbox oil of the Aprilia SR 50R?
How do you replace the gearbox oil of the Aprilia SR 50R?
Sr 50 In order to replace the gearbox oil of the Aprilia SR 50R, you need to loosen the drain plug located in the central lower part of the transmission ca…
How to Replace the Variator and Rollers on an Aprilia SR 50R
How to Replace the Variator and Rollers on an Aprilia SR 50R
Sr 50 In this video tutorial, you will see step-by-step instructions for disassembling and replacing the variator and rollers on the Aprilia SR 50R scooter…
How do you disassemble the engine of the Aprilia SR 50?
How do you disassemble the engine of the Aprilia SR 50?
Sr 50 The engine of the Aprilia SR 50 can be disassembled by loosening the screws that secure the block to its housing in the center of the frame: once the…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos