Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the rear spring preload on the Aprilia SR GT 125

Model: Aprilia Sr Gt 125
Part: Shocks

Video tutorial

In this video we can see how to adjust the rear spring preload on the Aprilia SR GT 125. It comes from the factory with the stiffness shown by the YouTuber in the video. To make the adjustment we need a spark plug tool and an extension.

After making the adjustment on one side, we need to do the same on the other side. One side is much simpler because there are no other components to complicate the job. The other side is more difficult because we have the VarioMatic which makes access much tighter, considering the tool we use for the adjustment.

However, with a bit of balancing we should be able to do it.


Posted on 31 July 2025 by ScegliAuto


Related tutorials

How to Set the Time on the Aprilia SR GT 125 Scooter?
How to Set the Time on the Aprilia SR GT 125 Scooter?
Sr Gt 125 In this tutorial, see how to set the time on the Aprilia SR GT 125 scooter, a very simple and quick operation to perform, for example, after disconne…
How do you replace the battery of the Aprilia SR GT 125?
How do you replace the battery of the Aprilia SR GT 125?
Sr Gt 125 It will be possible to replace the battery of the Aprilia SR GT 125 by opening the under-seat compartment to access the internal area: the correspond…
How do you replace the air filter of the Aprilia SR GT 125?
How do you replace the air filter of the Aprilia SR GT 125?
Sr Gt 125 To replace the air filter of the Aprilia SR GT 125, you need to loosen the screws that secure the cover of the air filter box: this will be located n…

How to replace the engine oil and oil filter on a Moto Guzzi V7 Stone

Let’s discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Moto Guzzi V7 Stone. First, place the motorcycle on its stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; clean or replace the metal oil filter as shown in the video. At this point, unscrew the oil filler cap and top up the oil; check the level from the side window!

Watch the video!


by ScegliAuto

More videos