Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Aprilia SR GT 125 Scooter?

Model: Aprilia Sr Gt 125
Part: Clock

Video tutorial

In this tutorial, see how to set the time on the Aprilia SR GT 125 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, insert the key and turn on the instrument panel, then press and hold the "SET" button located below the display for about 5 seconds.

Once the time starts to flash, adjust the hour value using the same button and switch to adjusting the minutes by pressing it quickly twice. Similarly, you can save the setting.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service on the Aprilia SR GT 125 Scooter?
How to Reset the Service on the Aprilia SR GT 125 Scooter?
Sr Gt 125 In this tutorial, you will see how to reset the service on the Aprilia SR GT 125 scooter, a very simple and quick operation. Before proceeding, ensur…
How to Change the Engine Oil on the Aprilia SR GT 125 Scooter
How to Change the Engine Oil on the Aprilia SR GT 125 Scooter
Sr Gt 125 In this tutorial, you will learn how to change the engine oil on the Aprilia SR GT 125 scooter, a very simple and quick operation. Before proceeding,…
How to adjust the rear spring preload on the Aprilia SR GT 125
How to adjust the rear spring preload on the Aprilia SR GT 125
Sr Gt 125 In this video we can see how to adjust the rear spring preload on the Aprilia SR GT 125. It comes from the factory with the stiffness shown by the Yo…

How to Change the Transmission Oil on a Piaggio Vespa GTS Scooter

In this tutorial, you will see how to change the transmission oil on a Piaggio Vespa GTS scooter, a very simple operation applicable to all engine sizes. First, wait until the engine is completely cold, then position a container underneath the transmission area and, using a 6 mm hex socket spanner, unscrew the drain plug. Allow all the oil contained in the casing to drain out, reinsert the plug, and add the necessary amount of oil through the upper hole. You can use a pump or a syringe to assist with this.

Watch the video!


by ScegliAuto

More videos