Do it yourself
Frequently asked questions about cars and motorcycles

Model: Aprilia Rs 660
Part: Engine oil

To change the oil of an Aprilia RS 660, the first step is to slightly warm up the engine by leaving it running for a few minutes. This allows the oil to become more fluid, making it easier to completely drain it. Once the engine is turned off, place the motorcycle on a stable stand and position a container under the oil drain plug, located under the engine. Use a wrench to loosen the drain plug and let the oil flow out completely. Make sure to wait a few minutes for all the old oil to be removed. After the oil has stopped flowing, carefully clean the area around the drain plug to remove any residue and carefully tighten the plug, avoiding over-tightening it to avoid damaging the threads. Next, locate the oil fill plug and use a funnel to add the new oil, following the specifications indicated in the Aprilia RS 660 manual regarding the quantity and type of recommended oil. After pouring the oil, tighten the fill plug, start the engine, and let it run for a few minutes to allow the oil to circulate throughout the system. Check for any oil leaks and turn off the engine.

Posted on 30 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Rs 660 In this brief and simple guide, you will learn how to replace the engine oil and oil filter of the Aprilia RS 660 motorcycle. First, lift the motorcy…
Rs 660 Today we will discover the instructions that will allow us to change the driving modes or engine mappings on the Aprilia RS 660, as well as on the Tu…
Rs 660 To change the motor oil of an Aprilia RS 660, start by lifting the motorcycle and placing it on a stable support. Remove the oil filler cap, located …

How to Remove the Belt and Variator from the Aprilia SR MAX

In this brief and simple guide, follow the instructions to remove and replace the drive belt and variator of the Aprilia SR MAX scooter. First, place the scooter on its centre stand and start unscrewing the screws of the transmission cover to remove it. Next, unscrew the central nut of the fan and clutch bell to take them off, as shown in the video. Now, remove the drive belt and variator, replacing the rollers if necessary; then refit all the transmission components.

Watch the video!


by ScegliAuto

More videos