Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. : Klx 300 : How to change the oil of a Kawasaki KLX 300?

Model: Kawasaki Klx 300
Part: Engine oil
How to change the oil of a Kawasaki KLX 300?

To change the motor oil of a Kawasaki KLX 300, follow these steps. Start by placing the motorcycle on a flat surface and make sure the engine is warm but not too hot. Locate the oil drain plug on the engine crankcase and remove it with an appropriate wrench. Place a collection container under the oil drain plug to collect the used oil. Remove the oil fill plug located on the top of the engine to facilitate drainage. Once the used oil is completely drained, reinstall the oil drain plug and make sure it is securely tightened. Next, fill the engine with new motor oil through the oil fill plug until reaching the recommended level indicated in the owner's manual. Finally, start the engine and check for any oil leaks.


Posted on 21 April 2024 by ScegliAuto

How to change the engine oil and oil filter of the Mv Agusta F3 800

Let's find out in this guide how to replace the engine oil and oil filter of the Mv Agusta F3 800, following these simple and quick steps. First we put our bike on the stand and start unscrewing the screws of the lower fairing; then unscrew the oil vent bolt, letting it drain in a container for about ten minutes. At this point, unscrew our oil filter, using the appropriate wrench, and replace the cartridge with the new one; unscrew the filler cap to top up, following the video to the end!

Watch the video!


by ScegliAuto

More videos