Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Aprilia Shiver 750?

Model: Aprilia Shiver 750
Part: Exhaust muffler

Video tutorial

The replacement of the exhaust pipe installed on the Aprilia Shiver 750 can be carried out by loosening the screws that secure the panel located at the rear fender: once the screws have been unscrewed, it will be possible to proceed by widening the connecting clamp between the terminal and the collector.

Then it will be necessary to unscrew the screws that secure the exhaust pipe to the supports so that it can be removed from its housing in order to position the new one: this can now be fixed and connected, ensuring that everything works correctly.


Posted on 7 September 2025 by ScegliAuto


Related tutorials

How to Replace the Exhaust on an Aprilia Shiver 750?
How to Replace the Exhaust on an Aprilia Shiver 750?
Shiver 750 To replace the exhaust on an Aprilia Shiver 750, first loosen the screws that secure the old exhaust to its supports at the rear. After removing the …
How to Replace the Coolant in the Aprilia Shiver 750?
How to Replace the Coolant in the Aprilia Shiver 750?
Shiver 750 To replace the coolant in the Aprilia Shiver 750, position a container under the drain hose to collect the old fluid. The hose must be disconnected f…
How to Replace the Battery of the Aprilia Shiver 750?
How to Replace the Battery of the Aprilia Shiver 750?
Shiver 750 To replace the battery on the Aprilia Shiver 750, detach the seat from its housing to access the components underneath: here you will find the batter…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos