Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads on an Aprilia SR 150?

Model: Aprilia Sr 150
Part: Brake pads

Video tutorial

It will be possible to replace the front brake pads on the Aprilia SR 150 by unscrewing the screws that secure the brake caliper to its corresponding housing: once they have been loosened, it will be possible to remove the brake caliper from the disc and take out the pin that holds the pads in place.

Once the old pads have been removed from their housing, the new ones can be inserted: these can now be secured with the appropriate pin in order to reposition the caliper on the disc and fix it in place with the corresponding screws.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

How do you replace the front brake pads of the Aprilia SR 150?
How do you replace the front brake pads of the Aprilia SR 150?
Sr 150 In order to replace the front brake pads of the Aprilia SR 150, you need to loosen the screws that secure the brake caliper to its housing: once thes…
Replacing the Front Brake Pads on an Aprilia SR 150
Replacing the Front Brake Pads on an Aprilia SR 150
Sr 150 This guide shows how to remove and replace the front brake pads on an Aprilia SR 150 scooter, following the instructions below. First, place your sco…
How to Remove the Front Wheel of an Aprilia SR 150
How to Remove the Front Wheel of an Aprilia SR 150
Sr 150 Before starting, position your Aprilia SR 150 on the centre stand. Begin by undoing and removing the central nut that secures the front wheel axle. T…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos