Do it yourself
Frequently asked questions about cars and motorcycles

Model: Aprilia Sr 150
Part: Brake pads

This guide shows how to remove and replace the front brake pads on an Aprilia SR 150 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the bolts securing the front brake caliper; then remove it from the brake disc and subsequently the pads, as shown in the video. At this point, clean the caliper of dirt and press the caliper piston to retract it; then install the new high-quality pads and reassemble everything!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Sr 150 In order to replace the front brake pads of the Aprilia SR 150, you need to loosen the screws that secure the brake caliper to its housing: once thes…
Sr 150 It will be possible to replace the front brake pads on the Aprilia SR 150 by unscrewing the screws that secure the brake caliper to its corresponding…
Sr 150 Using an Allen key, undo the two bolts that secure the caliper to the brake disc. Once the brake caliper is removed, also undo the pins that hold the…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos